4G LTE B1 (FD 2100)
Band 1 is an LTE operating frequency Band. LTE is designed to work across a number of frequency bands – E-UTRA operating bands- currently ranging from 450 MHz up to 3.8GHz. The available bandwidths are also flexible starting with 1.4 MHz up to 20 MHz with Carrier Aggregation allowing use of wider multiples. LTE is developed to support both the time division duplex technology (TDD) as well as frequency division duplex (FDD). Availability of specific bands varies per country and operator.
4G LTE Band 1 is defined as for use as follows:
|Frequency Range:||1920 – 1980 UL / 2110 – 2170 DL|
|Width of Band:||60MHz|
|Channel Plan||FDD (Frequency Division Duplex)|
Available 4G LTE Hardware for Band 1:
4G LTE Base Station hardware
4G UE (User equipment) Terminals
(Please enquire for availability of specific devices supported for this band)
Consumer CPE Devices
Device compatible with LTE B1 (2100)
Xiaomi Redmi 7 Dual SIM TD-LTE CN 16GB M1810F6LE
Xiaomi Redmi 7 Dual SIM TD-LTE CN 64GB M1810F6LE
Samsung SM-G9700/DS Galaxy S10E Dual SIM TD-LTE CN 128GB (Samsung Beyond 0)
Oppo F11 Pro Dual SIM TD-LTE IN 64GB CPH1969
Oppo Realme 3 Dual SIM TD-LTE IN 64GB RMX1825
Oppo Realme 3 Dual SIM TD-LTE IN 32GB RMX1825
Xiaomi Mi 9 Transparent Standard Edition Dual SIM TD-LTE CN M1902F1A 256GB (Xiaomi Battle Angel)
Xiaomi Redmi Note 7 Dual SIM TD-LTE IN 32GB MZB7411IN / MZB7263IN / MZB7264IN (Xiaomi Lavender)
Xiaomi Redmi Note 7 Dual SIM TD-LTE APAC 64GB M1901F7H (Xiaomi Lavender)
Xiaomi Redmi 7 Dual SIM TD-LTE CN 32GB M1810F6LE
Countries using Band 1:
Countries that currently operate LTE networks in this band include:
South Africa (Cell C, MTN, Vodacom)
* Note that this list may not be complete. Also, regional private LTE networks may also operate in these bands.
LTE is a standard defined by the 3GPP as technology for 4th generation (4G) mobile wireless networking technology.
Complete List of LTE Bands
For a complete list of E-UTRA operating bands for LTE please Click Here
FDD and TDD LTE frequency bands
FDD spectrum requires pair bands, one of the uplink and one for the downlink, and TDD requires a single band as uplink and downlink are on the same frequency but time separated. As a result, there are different LTE band allocations for TDD and FDD. In some cases these bands may overlap, and it is therefore feasible, although unlikely that both TDD and FDD transmissions could be present on a particular LTE frequency band.
The greater likelihood is that a single UE or mobile will need to detect whether a TDD or FDD transmission should be made on a given band. UEs that roam may encounter both types on the same band. They will therefore need to detect what type of transmission is being made on that particular LTE band in its current location.
The different LTE frequency allocations or LTE frequency bands are allocated numbers. Currently the LTE bands between 1 & 22 are for paired spectrum, i.e. FDD, and LTE bands between 33 & 41 are for unpaired spectrum, i.e. TDD.
TDD LTE frequency band allocations
With the interest in TDD LTE, there are several unpaired frequency allocations that are being prepared for LTE TDD use. The TDD LTE bands are unpaired because the uplink and downlink share the same frequency, being time multiplexed. TDD LTE is popular in ISP and closed networks where there is either predominantly Data-centric use (rather than voice), no legacy of 2G/3G, or pressure on limited spectrum available.
For Further Information on LTE Bands
For More Information on LTE networking please Contact Us